|
Suitable specifications
|
CE (EMC), UL/cUL, KC, GL, BV, RINA, NK
|
|
Performance specifications
|
Analog input
|
Analog input range
|
Input voltage
|
|
DC - 10 V ~ + 10 V (input resistance 200 kΩ)
|
|
Input Current
|
|
DC - 20 mA～20 mA, 4 mA～20 mA (input resistance 250Ω)
|
|
Enter channel
|
Channel 8
|
|
absolute maximum input
|
Input voltage
|
|
±15 V
|
|
Input Current
|
|
±30mA
|
|
Input properties
|
For each channel, the input mode (voltage/input current) can be set.
|
|
Diguido output
|
Input voltage
|
|
14 bit signed binary + 1 bit
|
|
Input Current
|
|
13 bit symbol binary + 1 bit
|
|
resolution
|
Input voltage
|
|
0.63 mV (20 V × 1 / 32000)
|
|
2.50 mV (20 V×1/8000)
|
|
Input Current
|
|
- 20 ～+20 mA: 5.00μA (40 mA×1/8000), 2.50μA (40 mA×1/16000)
|
|
+ 4 ~ + 20 mA: 4.00μA (16 mA×1/4000), 2.00μA (16 mA×1/8000)
|
|
Comprehensive accuracy
|
Input voltage
|
|
Ambient temperature 25℃±5℃: Full scale 20 V vs. ±0.3% (±60 mV)
|
|
Ambient temperature 0℃～55℃: full scale 20 V vs. ±0.5% (±100 mV)
|
|
Input Current] [
|
|
Ambient temperature 25℃±5℃: Full scale 40mA vs. ±0.3% (±120μA), +4mA ~ 20mA input is the same (±120μA)
|
|
Ambient temperature 0℃～55℃: Full scale 40mA vs. ±0.5% (±200μA), +4mA～20mA input is the same (±200μA)
|
|
A/D conversion time
|
500 μs × channel used
|
|
Insulation method
|
・Analog input section and during sequence, photocoupler is more insulated than
|
|
・The DC/DC converter is insulated between the analog input section and the power supply
|
|
· Each channel is not insulated
|
|
temperature sensor, temperature
|
input signal
|
Thermocouple K type, J type, T type
|
|
Differences in channels per K-type, J-type, T-type possible
|
|
Enter channel
|
Channel 8
|
|
Rated temperature range
|
K type] [
|
|
- 100 ℃ ~ 1200 ℃ (- 148 °F ~ 2192 F)
|
|
Type] [ J
|
|
- 100 ℃ ~ 600 ℃ (- 148 °F ~ 1112°F)
|
|
T type] [
|
|
- 100 ℃ ~ 350 ℃ (- 148 °F ~ 662°) F
|
|
Diguido output
|
K type] [
|
|
- 1000 ～12000 (- 1480～21920)
|
|
Type] [ J
|
|
- 1000 ～6000 (- 1480～11120)
|
|
T type] [
|
|
- 1000 ～3500 (- 1480～6620)
|
|
( ), Diguido value when set in Fahrenheit
|
|
resolution
|
K type] [
|
|
0.1 ℃ (0.1 °F )
|
|
Type] [ J
|
|
0.1 ℃ (0.1 °F )
|
|
T type] [
|
|
0.1 ℃ (0.1 °)F
|
|
Comprehensive accuracy, measurement accuracy
|
K type] [
|
|
Ambient temperature 0℃～55℃: ±0.5% of full scale
|
|
( ±6.5℃/±11.7°F)
|
|
Type] [ J
|
|
Ambient temperature 0℃～55℃: ±0.5% of full scale
|
|
( ±3.5℃/±6.3°F)
|
|
T type] [
|
|
Ambient temperature 0℃～55℃: ±0.7% of full scale
|
|
( ±3.15℃/±5.67°) F
|
|
control method
|
according to sequence procedure
|
|
Action when input is disconnected/short-circuited
|
When using the thermocouple input method, only the disconnection detection function is available (equipped with V 1.10 or later of FX 2 N - 8 AD)
|
|
action sequence program
|
|
conversion speed
|
Input [voltage, current input only when used]
|
|
500 μs × channel used
|
|
When using thermocouple input channel [1] or above
|
|
The input voltage and current input channels are one ms × the channel used.
|
|
Thermocouple input uses channel 40 ms × channel
|
|
(Using channel, input voltage, current input, thermocouple input using all channel score table)
|
|
Insulation method
|
・Analog input section and during sequence, photocoupler is more insulated than
|
|
・The DC/DC converter is insulated between the analog input section and the power supply
|
|
· Each channel is not insulated
|
|
Input and output share score
|
8 o'clock (input or output can be any countdown)
|
|
Applicable sequence
|
FX 2 N, FX 3 U, FX 2 NC, FX 3 UC
|
|
"Connector Type Serializer Connected to About>
|
|
FX 2 CNC access, FX 2 NC-CNV-IF is necessary.
|
|
A connection of FX 3 UC, FX 2 NC - CNV - IF or FX 3 UC - 1 PS - 5V is necessary.
|
|
quality
|
0.4kg
|
