|
project
|
describe
|
|
signal level
|
5V12V and 24V depend on the connection terminals. Line driver output type is connected to the 5V terminal
|
|
frequency
|
Single phase single input: no more than 50KHZ
|
|
Single-phase dual input: each does not exceed 50KHZ
|
|
Dual-phase dual input: no more than 50KHZ (1 multiple ) ; no more than 25KHZ (2 multiples ) ;
|
|
No more than 12.5KHZ (4 times )
|
|
Counter range
|
32 -bit binary counter: -2147483648 to +2147483647
|
|
16 -bit binary counter; 0 to 65535
|
|
Counting method
|
Up / down when automatic ( single-phase dual input or two-phase dual input ) ; when working in single-phase single input mode, up / down is determined by a PLC or external input terminal.
|
|
comparison type
|
YH: direct output, processed by hardware comparator.
|
|
YS : Output after processing by software comparator, maximum delay time is 300ms .
|
|
Output type
|
NPN open circuit output 2 points 5 to 24V DC 0.5A per point
|
|
Accessibility
|
The mode and comparison results can be set through the parameters of the PLC .
|
|
Current values, comparison results and error status can be monitored.
|
|
Number of occupied I/O points
|
This block occupies 8 input or output points ( either input or output )
|
|
Power supply provided by base unit
|
5V , 90mA DC ( internal power supply provided by main unit or power extension unit )
|
|
Applicable controllers
|
FX1N/FX2N/FX2NC ( requires FX2NC - CNV - IF)
|
|
Dimensions ( width )*( thickness )*( height )
|
55*87* 90mm (2.71*3.43*3.54 inches )
|
|
mass ( weight )
|
0 . 3Kg (0.66Ibs)
|
