MHI HASEG Worm Gear Reducer SUHA65L-5

MHI HASEG Worm Gear Reducer SUHA65L-5

Technical Specifications:

• Model: SUHA65L-5
• Type: Worm Gear Reducer
• Reduction Ratio: 5:1
• Input Speed: 1500 RPM
• Output Speed: 300 RPM
• Output Torque: 65 Nm
• Efficiency: 80%
• Mounting Position: Horizontal
• Housing Material: High-strength Cast Iron
• Lubrication: Synthetic Oil
• Weight: 15 kg
• Temperature Range: -10°C to 60°C
• Protection Class: IP55

How to Use the MHI HASEG Worm Gear Reducer SUHA65L-5

1. Installation

1. Preparation:

   • Ensure that the mounting surface is clean, flat, and capable of supporting the weight of the gear reducer.
   • Check that the input and output shafts are aligned correctly to avoid misalignment issues.

2. Mounting:

   • The SUHA65L-5 is designed for horizontal mounting. Securely attach the gear reducer to the mounting surface using appropriate bolts and fixtures.
   • Ensure that the gear reducer is aligned with the input and output shafts to prevent unnecessary wear and tear.

3. Connecting Input:

   • Attach the input shaft to the driving motor or other power source. Ensure that the connection is secure and that the input speed is within the gear reducer's specified range (1500 RPM).

4. Connecting Output:

   • Connect the output shaft to the driven machinery or system. Make sure the connection is properly aligned and secured.

2. Operation

1. Start-Up:

   • Before starting the system, check the lubrication level and ensure that synthetic oil is properly filled.
   • Verify that all connections are secure and that there are no unusual noises or vibrations from the gear reducer.

2. Running:

   • Operate the gear reducer within its specified parameters. The SUHA65L-5 has a reduction ratio of 5:1, which provides an output speed of 300 RPM when the input speed is 1500 RPM.
   • Monitor the performance and ensure that the output speed and torque are as expected.

3. Monitoring:

   • Regularly check the gear reducer for any signs of abnormal operation, such as excessive noise, vibration, or overheating.
   • Ensure that the temperature does not exceed the recommended operating range of -10°C to 60°C.

3. Maintenance

1. Lubrication:

   • Regularly inspect the lubrication system and ensure that synthetic oil is at the appropriate level.
   • Change the oil as recommended in the maintenance schedule to ensure optimal performance and longevity.

2. Inspection:

   • Periodically inspect the gear reducer for wear and tear. Check the gears, bearings, and seals for any signs of damage or degradation.
   • Ensure that all bolts and connections remain secure and that there are no signs of leaks.

3. Cleaning:

   • Keep the gear reducer clean and free from debris. Regularly clean the external surfaces and ensure that ventilation openings are unobstructed.

4. Troubleshooting:

   • If issues arise, such as unusual noise or performance problems, consult the troubleshooting section of the user manual or contact MHI HASEG or Melink Automation for support.

4. Safety

1. Precautions:

   • Follow all safety guidelines and procedures during installation, operation, and maintenance.
   • Ensure that all safety guards and protective equipment are in place to prevent accidents.

2. Training:

   • Ensure that operators and maintenance personnel are properly trained in the use and maintenance of the SUHA65L-5.

If you have specific questions or encounter any issues, refer to the user manual provided with the gear reducer or contact MHI HASEG for technical support.